Kids Bicycle Hubs Nut M10 Folding Balance Bike Wheel Hubs Axle Nuts Golden Price in India, Specifications, Reviews & Offers. Buy online at Amazon.

For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► http://bit.ly/SubRJTheBikeGuy
The hub on my bicycle wheels had ceramic ball bearings so they fell right out. I only had to tip the wheel over after taking out the cup. A couple where still stuck in the hub though. There was some grease holding them down in place. I got them out with a set of tweezers. The ceramic ball bearings is the new thing now. Supposedly the ceramic ball bearings are more round, smoother, and have a lower friction resistance. I did check the size of them so I can get a new set. I didn't have the special park tool though so I used the screw/drill gauge that I already had. I just put the ball bearing in whichever hole it fitted in. It looks like they are 1/4". Nevertheless, I did get the hub overhauled. After I got it all back together I thought I did it wrong But after watching your video it looks like I did it exactly as you did. Which is a relief because now I wont have to take it all back apart again and redo it all. Thanks RJ. 😀
So incredibly helpful. Thank you!
Can you use Vaseline as a greaser
The cups in the wheel I'm working on are damaged but not replaceable. I replaced only the ball bearings and left the damaged cups and the wheel is completely silent now. It may only last a year, but this repair is cheaper and easier than rebuilding the wheel with a new hub.
I bought a bicycle and couldn't install the front wheel. I messed up in the hub. I hope i get it fixed tomorrow
nice work!
Thanks for this great video. Question: why is it important for the quick release lever to go on the non-drive side of the front wheel?
Your videos are of the highest quality. Camera placement, focus, sound, everything's perfect. And we learn so much from you. Thank you.
I want to remove back sidewheel pls
Doing this right now on my motor bike.. it was in need of a overhaul.. 🚲💨
Thanks your videos have really helped me out 👍
Great videos man
Hello RJ,could you make a video on a wobbly wheel with a freewheel type hub?
Considering I'm about to do a one year servicing on my bike. This is real good to know. Thank you for the video
Why when tightening the cone I can't get it smooth, only rough whether looser or tighter? What could be causing that please.
Man i wish this guy was my neighbor
the bearings on my bike was change because it has play and then my bearings was change and after some time it starting to wobbling again how to fix?
My rear wheel hub is wobbly but I can't undo the axle nUts to do anything to it
hey RJ, is it possible to replace loose bearings with caged bearings? If yes, is there any disadvantages of using caged bearings instead?
Thank you for making a very informative video in a 30 seconds. Because it is very frustrating to see other professionals like accept the cheap manufacture's lack of safety standard and compromise to switch both (THE HUB SAFETY WASHER & THE LOCK NUT) with just a tiny skinny (QUICK RELEASE SKEWER) very cheaply made!
I wondered what that tabbed washer was for. Thanks. :)
I nutted watching this. Thanks m8.
Hi can anyone help I have bought a muddyfox voyager ladies bike i can't get the front wheel on it's a if the forks won't drop onto the spindle can anyone give me some hints please
Oh my god I don’t know how to thank you enough I spent a good hour trying to figure it out.
Hi where can i buy the nuts and washer ?
Thank you.
For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► http://bit.ly/SubRJTheBikeGuy
Looks like I did it right. Thanks.
Thank you so much!!! Took mine apart and forgot the process of putting it back together lmao do the races really need that much grease packed in there though? I had no grease and have been using vegetable oil and it seems to work fine 😂
Brilliant. I learned so much from this. Thank you!
Omg I was struggling so much with this, just today I thought I got this right, but apparently not 😅
Suppose the racers were damaged, could you replace them on the hubs you have there?
i might just leave one cone on the axle and also use isopropyl alcohol to clean the parts. It evaporates quickly.
If anyone is using the older bikes with the nuts on the outside holding the wheel ( non quick release) remember to leave 1.5 mm of play so that when you tighten the 2 wheel nuts the wheel won't be binding. If there is too much play remove only the non drive nut of the wheel and adjust the cone spacing with your spanner and tighten it a bit more. Doing this from the non drive side means you do not have to take off the freewheel or the wheel itself so makes it very easy to adjust the play.
Thank you! Local bike shop said it would take 2 - 3 weeks to fix my wheel wobble and squeak, no way! With this video I did it myself and no more wobble or squeaking! Everyone on the trail thanks you so they don’t have to hear my wheel screeching!
Nice job! Very clear. Tip for the tightness adjustment on the balls: there may be absolutely no friction at the time you're still adjusting them. When you fasten all the later nuts, the pressure is only going to increase. When the balls are under pressure and being heavily used, temperature will go up, balls will expand a little bit. That makes them more prone to failing.
Trying to replace a spoke I had a few bearings drop out, so this will be useful for replacing those! Thanks.
Thanks to your video on replacing twist grip shifters with trigger shifters, I have had an enjoyable Saturday morning replacing the ones on my old mountain bike. Now I have found this video, I am almost excited by the fact that I noticed that there is a lot of play in the rear axle. Now I really need to get me some marine grease ! :-)
Hia firsly thanks for your video's always my go to guy. Would you have anything more to say about getting the best possible tightness on the bearings. I always struggle with being too loose or too tight.
Thanks for the informative video! I have a specialized 'Hard Rock' bike and am wondering what size cone wrench I will need? After shopping for them I find that there are different sizes and I don't want to buy a whole set.. Thanks in advance.
I was given a schwinn 29 in mountain bike and the back wheel is missing the rod that holds it to the bike and what do I need to get someone told me that I need a quick release hub rod and some bearings I ordered a pair of bearing but there are not loose balls like that they were stuck together in a ring shape but didn't fit do I need to get loose one like yours and how do I find out the size I need? Sorry for all the questions lol I just want to get this bike up running for my son. Thank you.
sir what is the size of ball bearing?
On threaded parts it's best to clean them with a small wire brush.
do the bearings need to be perfectly side by side in a circle? or is it okay if they're a bit crooked as long as they are sitting in place? I imagine they move a bit as the wheel spins since they are not tightly in place in the race.
I'm reusing the bearings and using ppl-I polyrube 1000.
Thanks not i know my bike not spin freely because of tighten nut in the bearing it will try to loosen nut to move the wheel..
🙏🙏🙏 Hi Friends Please Subscribe My Channel www.youtube.com/c/VIJAYTECHIDEAS (VIJAY TECH IDEAS) For Support Me and Press Bell Icon For Latest Updates. My Other Medicine Related YouTube Channel www.youtube.com/c/VIJAYPHARMACY Please Also Subscribe This Channel For Medicine Knowledge. 🙏🙏🙏 🙏🙏🙏 Thank You 🙏🙏🙏
Price bataye
Ye Kaya mileage
Bhai Biharig kaha milega bat siege batao
কাহা মিলে গা ভিয়ারিগপ
Ok
Bhai.cycle.me.kitne.number.bering.lagti.hai
Spendal me kaise bearing lagaye ye bhi batao bhai
Hero cycle ke Centra hub mein kaun se number ka bearing Bura Bura theek hai kya
Bhai cycle se carcar aavaj aarhi he usaca bhi video dalo na
Very nice I like it thanks God bless you and your family Amen.
Very nice sir 👌
Sade cycle me kaun se number ki bearings padegi
Not smooth
Nikale kaise biaring ko
Nice vdeo
Nice video
How much a bearing cost?
Wheel nhi gum rha 😂😁🤣
Cycle wheel jaam Chal rhi hai