This actually worked!!! 😅 & I am a beginner... great video, thank you so much
the print head on my workforce 365 only prints in black, none of the colors seem to work. i replaced all the ink and tried the onboard print head cleaner but it still only prints in black. is it a dirty /clogged head or is the head just shot?
Hi, you have 2 kits on your site, one is the Black cage blaster and the other is print refresh. Which is the best option?
I have stylux 218 kindly help me to clean
Brilliant. It would have been nice to get a whole sheet of blotting paper, but aside from that this is excellent value for money and I only wish I had found you before. Thank you.
Hey, question. My printer was was printing most of the colors and none on black, cleaned all the heads and now it's not printing any thing? What can I do? I've run the heads clean sequence several times and still nothing. Help!!!!
After cleaning printer heads, the printer does not recognize ink cartridges. What can I do
Is this kit working for Epson L3060?
My printer just stopped working. It doesn’t on
Thanks for this. Does it matter where to attach the hose to the print head? I see there are a few different attach points.
Hi there, We had a problem with the magenta colour. Bought the kit, flushed all of them through. Magenta is now working but now Black is completely not coming out at all when printing. We've tried sucking it with the syringe to disband air, we've flushed it through a couple of times but nothing is helping. Before we started cleaning there was never any problem with the black. Have you got any suggestions as to what it might be?
Where can i get a cleaning kit?
I did this and it has stopped printing at all. I get a blank page? I’ve done this couple of times now and still no results. Keeping getting blank page. What should I do? Please help :( thank you x
i have EPSON L310, in the middle of printing progress, the black ink get clogged, after clean one or two times, it normal in the beginning, but get clogged again in the middle, does my headprint got damaged, or just blocked, i used your solution once but not leave overnight, and the situation still same, please respon, thanks Printer Refresh
i am sorry for the english
Can I use the same method for Epson XP-440?
It only shows one nozzle being cleaned so, are you doing this on each nozzle and if so why don't you mention that?
Is it same for all printer?????
Is it same for all printer?????
Will this method work for my epson
Tried this and now my printer doesn't recognize the print heads. It keeps indicating I need to replace them. Now what?????
Anyone else using Windows? Haaaaaaaaaa
Fuck me, you must think we're idiots with these suggestions. You forgot to say to make sure the printer is plugged in & switched on.
Thank you!!! Been trying to fix my black for 4 days. 🤦
It is so clear what Epson does, you did not spend a ridiculous amount of money on a few ml of ink so we tell you we cannot recognise the ink cartridge. A variable timer in the software disables printing unless you buy the original ink, then you will buy a new Epson printer because you do not want to throw away 100 £, $, Euros ... and then you probably learned your lesson. DO NOT BUY CHEAP INK, ONLY EPSON INK! Fucking Bastards!!!
I reviewed this video and instead of doing everything beginning with step 1, I just unplugged the printer for 2 hours. Problem solved.
I bought original Y cartrige 702 and it worked. The 702xl was working and all of a sudden it didn't work anymore. 702 original worked. The bad thing is that if a cartridge doesn't work the printer is completely useless. I couldn't even scan to email or computer.
Cartridge still won't work
Had epson for 2 month and its problem after problem never buy Epson.
I Had a HP printer for years and it was fantastic.
This was very good.
Throw the printer in the garbage, email the document instead... stupid companies forcing us to buy their overpriced crap!!!!!
I bought big packages, but one blue color and one black ink were not in original package they could have been from returned ones and they sold them to me ,they are working at all
This is shitting me.
Never use Epson printer, it is wastage of time and money.
John 14:6 KJV, "Jesus saith, I am the WAY, the TRUTH, and the LIFE: no man cometh unto the Father, but by me."
1 Peter 2:24 NIV, "He himself bore our sins in his body on the tree, so that we might die to sins and live for righteousness; by his wounds you have been healed."
John 3:16 KJV, "For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life".
Romans 3:23-24 NIV, "...for all have sinned and fall short of the glory of God, and all are justified by His grace through the redemption that came by Christ Jesus".
John 8:12 KJV, "I am the light of the world: he that followeth me shall not walk in darkness, but shall have the light of life".
Jesus is the only WAY to God, the TRUTH of salvation, and the Breath/Bread of LIFE.
ACCEPT Jesus Christ as your Lord and Saviour. Sins separate us from God because He's Holy. All sins will be forgiven and erased through faith in Christ Jesus. God ♥ you, is alive, merciful, faithful, truthful, and is waiting with His arms wide open FOR YOU! For Jesus did not come to establish a religion, but to become a mediator between God and men.
Through the Grace of God, Jesus was given to us by paying the price at the Cross at Calvary. Repent and confess from your sins to Jesus and ask Him to forgive you. A sinner cannot save a sinner, only a sinless person can. That sinless Being is Jesus Christ Himself.
Through the faith in Christ Jesus, the sick was healed; everywhere He went, He healed the blind, the mute, the deaf, the demon-possessed, raised the dead, as well as performed many miracles; He also walked on water, turned water into wine, calmed the storm with His command, and was raised up from the dead. Miracles are still being seen today! Jesus is our helper, our healer, our refuge/protection, and our strength for when time gets tough.
God is standing and knocking at the door waiting for your answer right now because THE KINGDOM OF HEAVEN IS COMING.
Here is a working firmware to roll back epson4100 update. https://gofile.io/d/OZTY50
Hi viandant5, I got this problem but I failed. I got the Epson 2200 Photo Stylus printer. It's now is a headache for me. I've been trying everything that I learned all of my life but I'm still struggling to deal with it.
Take the printer to the woods. remove the cartridges. Shoot the printer with a 12GA shotgun. This would ease your anger to the device and make you feel even.
#0 Buying an Epson printer you're making a BIG MISTAKE!
There's many of us with the same roblem - but EPSON never says anygthng!
I've tried eevrything, but it will not print, nor will the red light go off!
hi . l like your videos .
can you please help me solve my hp printer 2515 deskjet ... the printer can not recognise acartridge after my secend black ink filling by injuction .
I have refilled my ink cartridges but why isn’t it working I have a epson 288.
Got my fingers stained bad... should of watched ur video first
I guess wearing gloves might be advisable : )
You need to squeeze the side, middle bottom, repeatedly, because this primes ink down into the 3rd, bottom chamber. The cartridge has 3 chambers. By putting the ink into the 2nd chamber (as you show correctly), the 1st chamber also fills (top left), but the bottom chamber where the ink comes out, is very hard to get ink into, which is what massaging the cartridge accomplishes. This also will cause some spillage, which you correctly mentioned, but this is inevitable, meaning, wear gloves.
802 epson cartridge video?
too much work lol
I cant find an ink hole in tx700w, could someone help me, please?
I have a Epson WorkForce 2850. Ink cartridge 212XL can someone please tell me where I can find the Refillable cartridge for it
Cheaper buy whole new printer then ink
What ink cartridges are you using? I have an Epson R280 the cartridges don't work per your video instructions.
am unable to download its drivers.....epson stylus dx4050 for complete control on my pc.any help/link will truelly be appreciated
..................................... YAY !
my xp430 cartridge has no hole on top also
my Epson WF-2750 ink cartridge (220xl) does NOT have a fill hole along the top/front edge as indicated in video...
Great video, irritating music.
Fuck you dude
we were unaware that it would be cheaper to buy a different printer than use espon cartridges
Ink is a scam. A printer should have a fill port to make life easier.
Thanks, have used inkjet refill kits for years now. Recommend anyone doing this wear cheap plastic/latex gloves available from any WalMart, Walgreens etc. Also, squeeze gently, cotton inside doesn't absorb that quickly. I prefer these types of bottles over the inkjet syringes as you waste more ink with them over the squeeze bottles. Also keep ink in cool place, heat over time with dry out your ink.
Ya lo nerfearon para la version 1.17 de la vida
Youtube recommend this video 11 years later, now a don't have a printer with cartridges
2021. those buttons no longer exist. at least not on my epson 98/99 model inks
I know this video is 11 years ago, but is this legit?
Where is the rest hole on Epson Artsian 835?
Learn to be more aspirational, and work harder then buy yourself a Lazer Printer.
The way I print i only had to change the Cartridge one in 10 Years. And I can still have my quality document prints.
Who would be silly enough to throw a cartridge away while it was still printing?
TENET moment at 0:14
So why don’t ink refileras do that?
0:14 . So this is where Nolan got the inspiration for TENET..
Amazing how that defect worked in the manufacturers favor.
Just buy a printer with ink tanks that you can refill
I'm seeing this video 11 year later after I stopped using printer hahahhahahaya
Video: 57 seconds
Reading comments: 570 seconds
My Lexmark Z11 printer that I bought in year 2000 doesn't have one of these but I can tell it through the software that it's a new cartridge after I refill it with a syringe. I have it working under Windows 7 with a parallel port card in a PCI slot on the motherboard. The original driver wasn't meant for 64 bit processing but Lexmark's generic driver for Windows Vista 64 bit does the trick.
Only way for this to work is if that circuit board has some residue electricity stored up to even register a pin being pushed into a hole to close a circuit. Perhaps there's a capacitor that acts as a battery but I kind of doubt it.
I pushed the pin and its start bleeding!
Uh...if your paper is coming out showing that it’s low on ink, regardless of what the level monitor says, pressing a button will not make it print batter. This is a lie, if you’re out of ink, then it won’t magically reappear by pushing a button.
😂😂😂😂 There is no reset. You should buy refillable cartridge or auto reset chip and fill your old cartridge and stick the auto reset chip.