does it fit with Galax h310M motherboard?🙄
Retro case build with 2020/2021 gear ?
Can I fit a Noctua NHL12S in it?
I think i found best cheap ITX case. Thanks Linus!
Watching in 2020 , planning on i5 9600K with liquid cooler, 2X16 GB ram and to slap the MSI RTX 2070 it's 9.2 inches I'll have to Dremel down the fan shroud and heat sink to get it to fit
most def is unltimate small case for full game built rig. only negative point id give is the front power button that blocks the possibillity for a front big fan to suck the heat from the liquid cpu cooling system radiator. that woulda been perfect but a small fan fits anyway \m/ so. good job, nice video, thank you
Is there enough space to fit a motherboard of 22.6 cm x 18.5 cm size (micro ATX).? I know this is a mini-ITX case with a width of 26 cm.
Ty :D
hello linus, quick question, do you think that a MSI gtx 960 would fit in this case?
SD linus
These old videos make me live that part of my life all over again. I took so much refuge in technology...thanks for helping me making fall in love so much into this techie vocation.
You've changed.
Looks like you got two 3.5 standard hard drives on the side? Can't tell, but...even though the specs say max qty of 3 3.5 hard drives, looks possible to do two on the top bracket and two on the side if you forgo graphics card and side fans. Could we get a total of four 3.5 drives in this baby? Please answer if you know anyone.
2019?
This little case has served me well over the years. Just ordered a graphics card for mine, and when that arrives, I think I'm gonna take another crack at getting the H80i V2 cooler installed. It really doesn't seem that long ago that I built this machine.
worst vga location ever made
I miss those days...
2019
уродство
7:34 if the PSU was higher up to the top that would give more CPU clearance for air coolers :s
Love this thing. Got it for Christmas, I put a Gigabyte Z-87n WiFi mother board, an i5, 12gb of ram, gtx 970 and two chunky HDD’s, I also added another cooling fan. People keep thinking my computer is a small subwoofer. It’s adorable, sleek and with the weird specs, it’s been able to handle anything I throw at it, the front makes wire management easier too
Is there enough space to fit a motherboard of 22.6 cm x 18.5 cm size (micro ATX). I know this is a mini-ITX case with a width of 26 cm. Is there a little extra space in there?
I would like to have this case but with a space for a DVD drive in the front.
have you handsweat
You like it when I get cases neikied 😂
Nekked
Can you fit a ryzen cooler in there?
can this hold like three 3.5" hdd and one 2.5" ssd?
Can you fit a 200mm case fan up front?
Can it fit a 210mm gpu?
Logan has lovely hands
necked.
2:42, Surprised pig face!
Can You Fit GTX 970 mini or GTX 960 Mini
how he loves naked cases ;_;
Building a 4790k workstation in this thing. Not the easiest to build in, but once everything is all together, and you're not using the stock heatsink, things are great.
i love it .. 1x 240gb SSD and my Spare 2.5" 500gb HDD
Then H80i should be enough room for a nice build and my SFX 80+Gold 430W
with my GTX 750ti ^.^
Damn that thing is small makes me wanna use it in a upcoming build with a i7 and the R9 285 mini :)
so would there be space for another fan?
So I wonder what this thing would be like with a Delta THB 140mm fan on the front. Sufficient cooling?
# oldmantryingtobeyoung
If you have the box on my left side, I lose control over the USB ports and the ON button. The power supply at the rear of the box slightly out is tasteless and very ugly. For God's sake, where are the Designers ...
Not to mention the proportions that are also ugly ... do you know what proportions are?
Idiot.
can I fit a 140mm fan on that?
I have 214mm graphics card. Is there any way to cram those 4mm mroe in there?
i have the same pc but i have a little qeustion: dus the pc suport gta5 ?? can i play gta5 on that pc ?? cause i realy want too...tech of tomorrow can you give my anwser
Can most 120mm aio water coolers fit comfortably in this?
does the h80i fit on this case?
So, is this technically the slimmest possible ITX case ever? I can't imagine anything slimmer but still as functional as like this!?
my fan is a bit loud
can you give that to me
lol Sir you look like Goldberg lol love your video ;) keep it up
you are a funny guy.. lol love this vdo
Can i warm ul my cold pizza in there? Looks like a microwave
think i could fit a 760 in there? i need a much smaller form factor than what i have now and this looks perfect
I like the speakers on your table, what is the name on them?
This or the 250D?
Nice!!!!
Don't think my Asus DirectCU II 7850 would fit in there
you had me at lets just shut the frack up jump in and check this shiznick out.
Holy smokes Jay has come a longgggggggggggg way from 2014.
LESS width (not needed! HDs? Really?) and a bit more LENGTH... damn, just an inch longer would change everything!
Even though the specs say max qty of 3 3.5 hard drives, looks possible to do two on the top bracket and two on the side if you forgo graphics card and side fans. Could we get a total of four 3.5 drives in this baby? Please answer if you know anyone.
Wow, only 55k viewers for a JayzTwoCents video? xD
I am thinking about buying this case and mini itx z77 board with i7 2600k , 120mm AIO cooler and 1060/rx580
i had the problem feeting with my new zotec rtx2060 amp. But i can feet it by taking off the front panel of the case and panel of the rtx2060, then put in the gpu. final put the panel of gpu in.that work just fine.zotec rtx2060 is 209,6mm long.
"Held in place with four Philips head screwdrivers"
Building in this in a couple weeks. Gone for an EVGA 1050 ti, and an i5-8400 - cryorig c7 to cool!
He says no hot components, I have a gtx 1080ti, Ryzen 7 1700 16gb ram and a 750w psu, absolutely excellent case even though it gets physically hoy, just remember take out the fabric at the front
still around the same price today
In your opinion, is it possible to put a SFX PSU inside the CM Elite 110 ?
I love this case I just built a very powerful build in one of the smallest commercial case. This case is best ran with corsair SF 650 full modular Get the SFX to ATX adapter bracket it gives you better clearance for a better cpu cooler. I choose a Noctua NH - L9X65 - AM4 this is a low profile cooler but don't let its size fool you! It keeps the Ryzen 7 1700X 38 degrees at Idle and 49 after gaming I highly recommend both these if your going to build a gaming rig in this case for 2 reason,s . One being more room for air to flow, two less wires restricting the flow of air. next I went with a Samsung SSD 960 EVO (500GB) this also made more room for airflow. I also replaced the stock fan with a 140mm blue led to go with the blue led start button. I went with the Asrock X370 Mini ITX Board and a Z0OTAC GTX 1080 TI mini. On the opposite side of the gpu I put 2 blue 80mm led fans to increase airflow inside the case. for ram mushkin redline ddr4 3666 low profile ram. This little Cooler Master Elite 110 case has been on the market now almost 5 years and is still one of the best cases hands down for size and the hardware you can throw in them. Let say this two year ago you told me you could put a 1080 in this I would have laughed at you let alone a ti! It does but there is not even a mill to spare take your time installing it because it does take finesse but once in it is Incredible I have it in our living room hooked up to or 4k 65 inch LG oled my son and I can't stop gaming on it it is the ultimate HTPC - Gaming BEAST! It is so small it hides in a smll tv table and oled is on the wall similar to jay set up Zotac TI mini delivers the 4k at awesome frame rates! It cost me 1689.00 CAD to build It But the whole family enjoys it. The price tag was steep but well worth it!
GTX 1080 ! is small!
I have 214mm graphics card (and this chassis takes up to 210mm cards) - what would I have to do (cut smth, bend smth) to actually fit 214mm graphics card?
only itx/mini itx fit? not micro atx? :/
today 2017 this is a amazing case ! :) i have 2 of them .. using one as a linux box pc and the other one as a windows gaming box .. and i can basicly run everything on it as i have the 1070 mini in it :) so i LOVE this freaking little case ,,, the price is for this case is LOVE ... the footprint is small " same as the price " .. this is my fav case .. as a home user atlest ... NO need for a Big fugly case anymore .. and i f..ing love that :)
GPU choice isn't as limited anymore thanks to Zotac and Gigabyte's mini 10 series cards :D
got theGTX 970 SSC :(
Best config for this case; ASRock X99 itx mobo/5930K, R9 Fury Nano. Seidon 120V for the CPU and 2x Noctua NF-A8 80mm fans on the GPU side. Boom.
I have a boner for this case. I have one sitting in my closet waiting to come out. I'm really excited to lose my building virginity. Just can't wait to flex my PC muscle. I'm going to play games with it all night every night. Do you recommend coconut oil? Never mind, it's so small I'm afraid I'll lose it up there and won't be able to get it back out.